Truerock Interior is a residential drywall contractor providing residential drywall services in Edmonton for homeowners, renovators and home builders who need walls and ceilings that are hung straight, finished cleanly and ready for paint. Our crew handles drywall installation, repair, taping and texture for basements, additions, renovations and new homes, with honest upfront pricing and a clear scope before any board goes up.
587-989-3517
Clear quote before work starts
Board, tape, mud and sand
Paint-ready walls and ceilings
Plus six nearby communities
Most home projects need more than one stage done right, from hanging the board to the last coat of compound, so we cover the full drywall scope under one crew.
We hang new drywall in basement developments, additions, garages and full home builds, using 1/2-inch board on standard walls, moisture-resistant board in bathrooms and laundry rooms, and 5/8-inch Type X fire-rated board where code calls for it, such as walls and ceilings shared with an attached garage.
Nail pops, cracked joints, door-handle holes, water-stained ceilings and sections left open after plumbing or electrical work are cut out, patched and blended so the repair disappears once the wall is painted.
Every job is taped, mudded and sanded to an agreed finish level, from a standard Level 4 to a Level 5 skim coat for bright rooms and large flat ceilings. See our drywall taping and texture service.
Each part of a house puts different demands on drywall, so the board, fastening and finish are matched to the room.
Basement developments usually start with framing and insulation in place. We hang, tape and finish around beams, ductwork and bulkheads so the space reads as a finished floor. Need the walls insulated first? Our insulation services can be part of the same project.
Main-floor rooms and vaulted ceilings take the most light, so we plan board layout to keep joints off sightlines and finish to the level the lighting demands, with drywall ceilings textured or smooth.
Wet areas get moisture-resistant board, and attached garages get the fire-rated separation required between the garage and the house.
Residential drywall work usually comes up at one of three points in a home’s life.
Framing is done and inspected, and you need walls and ceilings boarded, taped and finished so painters and flooring can follow on schedule.
Walls have been opened up for a kitchen, bathroom or layout change, and new drywall has to line up and blend with the surfaces around it.
Edmonton's dry winters and seasonal house movement crack joints and pop fasteners. Our guide on why drywall joints crack explains what to watch for.
Every home project follows the same steps, so you know what is happening and when.
We look at the space, confirm what needs to be hung, repaired or finished, agree on the finish level and texture, and give you an honest upfront price before work starts.
Board is cut and screwed tight to the framing at the proper spacing, outside corners get corner bead, then joints are taped and built up in layered coats with proper drying time between each so seams don’t shrink or crack later.
Surfaces are sanded smooth, checked under light for flaws and left clean and paint-ready, with dust and offcuts removed from your home.
Homeowners pick Truerock because the price is honest and upfront and the finish is right the first time.
We are a drywall and interior systems contractor working across Edmonton and nearby communities including Sherwood Park, St. Albert, Spruce Grove, Beaumont, Leduc and Stony Plain. For larger builds and business spaces, see our commercial drywall services.
Answers to the questions homeowners ask us most before a drywall project.
We protect floors and fixtures, hang and fasten the board, then tape, mud and sand over several visits to allow drying time between coats. You are left with clean, paint-ready walls and ceilings.
Small patches and nail pops are often done in one or two short visits, because compound needs to dry between coats. Larger water damage or sections opened for plumbing can take a few days from cut-out to final sand.
Clear the rooms we are working in, move furniture away from walls and make sure framing, insulation, vapour barrier and any electrical or plumbing rough-ins are finished and inspected before we hang board.
Price depends on square footage, ceiling height, the finish level and texture you choose, and how much repair or demolition is involved. We give an honest upfront quote after a walkthrough, so you know the cost before work begins.
Yes. We match common textures such as knockdown and orange peel on repairs, and for large areas we may recommend refinishing the full wall or ceiling so the patch does not show.
Tell Truerock Interior what rooms are involved, whether it is new drywall, repairs or finishing, and the finish you want. We will set up a walkthrough and give you a clear, upfront quote, or you can reach us through our contact page.
587-989-3517
